Page 1 of 1

Hyperlink Support

Posted: Mon Apr 20, 2009 11:32 am
by bthews
If I convert a .pdf file with hyperlinks in it, can the hyperlinks be active still once I convert to flash?

Re: Hyperlink Support

Posted: Thu Apr 23, 2009 3:49 pm
by jaymz
Response by staff on Sat Feb 16, 2008: http://print2flash.com/forum/viewtopic. ... &t=46#p111

Re: Hyperlink Support

Posted: Tue Jun 16, 2009 11:33 am
by ginowhitaker
That's not a solution. That requires purchasing another $85 piece of software.

Re: Hyperlink Support

Posted: Thu Jul 02, 2009 12:49 pm
by Bob Coleman
markjen wrote:Yes, Hyperlinks are possible in the converted SWF-files.

Download the extension here: http://www.orontesprojects.com/swfgen/instswf.exe

Mark
That is just a repackaged version of the GPL SWFTools found here: http://www.swftools.org/

Re: Hyperlink Support

Posted: Fri Jul 17, 2009 11:25 am
by Bob Coleman
markjen wrote:
Bob Coleman wrote:That is just a repackaged version of the GPL SWFTools found here: http://www.swftools.org/
SWF Generator uses RDA Flash Compiler system version 7. Can I make the same swf's with SWFTools? I can't find the viewers...
Here is an example from the site.
http://www.swftools.org/flash/paper5.html

I used the SWFtools to do flash document viewing until I found Print2Flash. SWFtools is 100% customizable but I prefer the ease of use of P2F.

Re: Hyperlink Support

Posted: Wed Sep 01, 2010 5:23 am
by shashank
the swf converted doesnot seems to maintain the target related information for Flex application.

like

"_self","_top","_blank" it is very basic one? Is it configurable

Thanks

Re: Hyperlink Support

Posted: Tue Sep 07, 2010 6:20 am
by reenfoo
i think it is Is it configurable.. have u only used flex?

Re: Hyperlink Support

Posted: Mon Oct 11, 2010 2:32 am
by shashank
First sorry for replying too late... Message got unnoticed somehow. Yes i do use flex only and Finding it hard to get such configuration if you can guide me to the configuration location would be good help.

Thanks and Regards,
Shashank

Re: Hyperlink Support

Posted: Sat Sep 17, 2011 10:54 am
by staff
Hyperlinks for PDF documents are supported since version 3.1.